All About Wood Fence Panels to Metal Posts | Can You Attach Wood Fence Panels to Metal Posts | Comparison Between the Metal Fence and Wood Fence

 

Can You Attach Wood Fence Panels to Metal Posts?

People generally use wood fences, metal fence panels, or aluminum fence panels. Many prefer wood fences because they are ‘privacy fence screens’, they give you the privacy you need.

On the other hand, most metal fences used are chain-link, which doesn’t offer much in terms of chain link fence privacy.

These two fences have the benefit of their own. The wooden fence gives you privacy and an aesthetic look. And metal fences are best for their durability.

Is there any possibility we can combine both of them? And get benefit from both of the materials?

Yes, the answer to the above questions is yes, we can combine them both and get both of their benefits.

How that is possible, you will know that further in this article.

Comparison Between the Metal Fence and Wood Fence

The most common problem with a wood fence is that it eventually rots.

And this creates a huge problem in households. As you just don’t build a fence often.

Wood fence approximately lasts 15 to 20 years The problem can be fixed by using pressure-treated fence posts but not for long though.

And many people don’t want to spend extra money on it.

On the other hand, metal posts are durable for longer periods. The galvanized metal posts were approximately last for 70years. So many people go for this rather than wood posts.

But they are not aesthetically pleasing and don’t give but of privacy to the people in the house.

So here is a solution for all, you can attach a wood fence panel to a metal post, essentially attaching wood fence panels to posts. By doing that you get the benefit of both.

You get the durability of metal posts and the privacy and aesthetic look of the wood wall planks in the wood fence.

Building a wood fence that attaches to a metal post, or even wrought iron fence panels, is not much different from building a wood fence.

Although it is more expensive than the wood fence, it offers more options for backyard fence ideas and front yard fence ideas.

Because there is an additional cost of metal posts, screws and brackets get included in the cost of the wood fence.

Further, you are going to read how wood panels get attached to metal posts.

Also Read: All About Bathroom Wall Paneling Ideas | Bathroom Wall Panel Ideas | Top Bathroom Wall Paneling Ideas

How to Attach Wood Fence Panels to Metal Posts?

Attaching a wood fence panel to the metal post is not very difficult. You just have to follow some steps properly. Then it can be done easily.

Below there are different ways to attach wood fence panels to metal posts are mentioned.

There are three ways to attach Wood fence panels to Metal posts:-

1. Bracket and Screws
2. Wood Sleeves
3. Direct connection using screws

Bracket and Screws

The main way to attach wood panels to metal posts is by using brackets and Screws. The type of post is used to determine which bracket will be used.

For round posts and square posts, different shaped brackets are used.

There is a variety of brackets you can choose from.

But you have to ensure that it goes with the type of post in your house. All the brackets function the same despite their different shapes.

It used to attach two things that aren’t attached by themselves.

So basically it works as a middle man which helps in attaching wood fence panels and metal posts.

Things required for attaching the wood fence panel to the metal post are:-

• Metal screws as well as wood screws.No matter what type of bracket you use you need both types of screws.
• Drill and metal bits to punch holes in the metal post.
• Pencil to mark the holes, so they can be placed in accurate places.
• Tape to help in lining up things properly. One of the important things is to align the fence panel and post in a line. Otherwise, it can wobble and will not last for a long time.
• Level to level the post and the panel and plumb to install brackets.
• Corrosion-resistant brackets and Screws as will be used for outside. Otherwise, they will rust and will not be strong enough to support the fence panel.
• If it is possible one or two helpers, can hold the panel and the post in place and you can attach the brackets to it. Because doing this work by yourself can be hard.
• You should screw the bracket to the post first and then secure the panels. If you attach the brackets to the panel first, it will be difficult to slip them over the post.

Attaching Wood Fence Panels to Round Metal Posts

Round metal posts and fence slats are the most popular metal fence post options.

Because they are used with chain link fences, you get several bracket choices too.

Brackets used can be pipe rail ties- it is the most common wrap around the round metal post.

This screw can be inserted from both sides of the post and the wood panel.

The brackets get tightened around posts by using a bolt or screw or rail ties. It will not wobble when the connection will be strong.

Other than brackets you can also use metal screws to attach fence panels directly to the post. Round metal posts are hard to attach to a flat wooden piece.

To fix this problem you can buy a mounting block whose one side is rounded and the other side is flat.

Then you can attach the round side with the round metal post and the flat side to the wood fence panel.

Ensure that the radius of the inside of the block matches the radius of the post outside.

Attaching Wood Fence Panels to Square Metal Posts

Attaching wood fence panel to square metal posts are easier than the round metal post. Square metal posts are flat so the flat wooden planks easily get attached to them.

For this type of attachment brackets and screw or only screw works great

While attaching wood to metal, make sure that you use pre-drill holes and metal screws.

It makes the work easier. You can also use self-tapping screws, they drill into the metal by themselves.

They work best for metal penetration but they won’t go through the wood. So that will cause a problem.

So it is best to use metal screws and pre-drill holes. There will be a variety of brackets to choose from.

The range in different sizes, weights, strengths, etc. You have to select the screw size carefully otherwise the undersized ones will fall. When you pre-drill the holes the screws got placed in an accurate position.

When you buy screws make sure to take accountability for the thickness of the wood. It is a common mistake people do.

If the fence panel is 2inches make sure you buy at least 3inches screws for that.

So it can penetrate the metal properly.

Attaching T-Post and U-Channel

T-Post and U-Channel are the almost same thing. The standard T-Post or U-Channel is studded or plain metal without any holes in it. If it is plain metal without holes then you get two choices.

You can use metal screws and drill holes in your post or you can use a bracket for the post.

These are generally used for temporary fencing and many used them to keep animals inside. It is not used for residential fencing much. As it is not aesthetically attractive, not strong enough, and is not permanent.

They are not installed in concrete. They are generally installed in the dirt. They have flat ends which is a good thing as it makes the work easier.

Make sure the end touches the base of the fence.

Attaching to flat surfaces are easier than attaching one flat and one round surface.

Wires can be used as it works well with both of the options.

First punch holes and studs then you can use them to secure the wire tightly.

Wood Sleeves

Wrapping Metal posts with wood is one of the popular ways to attach a Wood fence panel to a galvanized metal post. In this, the metal post is wrapped in wood.

It gives the appearance of all wood fences with the strength of the metal.

So basically you will be benefitted from both materials. The wood conceals the metal.

You will get the aesthetic appeal of the wood and the strength and sturdiness of the metal. In this special mounting brackets are used.

It is used to post with the wood and conceal the metal post. These brackets have one flat side and one round side.

First, you have to screw the bracket onto the posts.

Then you have to screw 4 planks of wood around the bracket. It will form a box-like structure which is called a column wrap.

The column wraps are made without mounting the bracket.

After the column wrap is made you have to slide it over the metal post. Then you have to screw through the wood as well as the metal post.

If you will only screw the wood it will not be sturdy. So for better strength, you have to screw the wood as well as the metal post inside.

Ensure that the surface area of the inside of the column wrap is just a little bit more than the total area of the metal post.

It is necessary so the metal post will tightly fit inside the wrap.

Otherwise, the post can wobble inside the wrap. You can also use shims to hold the wrap tight around the metal post.

Ensure that you use rot-resistant wood as it will be used outside. Otherwise, the wood will rot and you have to remove it. The post wrap and the fence panel can be of different types of wood.

It is not necessary to choose the same types of wood for them. It depends on your taste.

Then you have to screw the fence panel with wood wrap and the metal within it.

Direct Connection Using Wire

A wood fence panel can be attached to a metal post by using wires. It is one of a way to attach the wood fence and the metal post.

It is a temporary solution as it is not durable like the bracket and screw method.

If want to attach the wood fence with the post for some time it is best for that.

But if you want something permanent it is not a good choice.

For this method, you need wires, pliers, and wire cutters.

You can go for a tool with the two-in-one setting with pliers as well as wire cutters.

You have to use a wire which is corrosion resistant as it will be used outside. Otherwise, the wire would rust and you have to change it again.

A thick gauge of wire is an important requirement for this work.

The wire will be used to attach the wood fence and metal post directly.

So it has to be sturdy, otherwise, it will just snap. And all your hard work will go to vain.

For the best type of wire connection, you have to put wire at least every 18 inches up the post.

It will secure the connection between the wood fence and metal post properly.

Then you have to wrap the wire around the post and the panel properly. You have to twist the wire carefully so that the wire gets tightly wrapped around the post and panel. If it remains loose that will be a problem, as it will make the post wobble.

You have to tighten the wire by twisting it several times.

Then you have to cut the excess wire. Then repeat this process 3 to 4 times for each of the holes in the panel and post.

There is not much space for the wire to Run through the panel or the post. Then you have to make holes in it by yourself using a driller.

Or you can mount a small bracket shaped like a U to run the wire through the post or panel.

---

• All About Acacia Wood | The Grain Structure of Acacia Wood | Types of Acacia Woods | Advantages of Acacia Woods
• Best Plywood for Flooring
• All About Bathroom Wall Paneling Ideas | Bathroom Wall Panel Ideas | Top Bathroom Wall Paneling Ideas
• All About Front Door Colors For Brick Houses | Benjamin Moore Paint Color Chart | Color Theory
• All About Gray House Color Schemes | Gray House Color Ideas | A Bit About Gray House Front Door Colors

---

Techniques to Secure the Attachment

How you attach your wood fence panels to the metal posts impact how stable they are. And it also depends on how you secure your fence post.

There are two ways to secure a metal post. Either you secure your fence port in the dirt or concrete.

If the fence post is light in weight you can secure it in the dirt.

But for a heavy fence port, you have to secure it in the concrete. It also depends on the design of the fence.

The chain link fence panel doesn’t need a stable post.

So you can use a light one and secure it into the dirt. Unlike solid fences, it does not catch the full force of the wind.

Solid fences prevent the wind to pass through it. The lateral forges get high in a storm.

For this, you need a stable post. If the post will not be stable then it will wobble around.

For this, you have to secure the post in concrete. You have put the galvanized post in at least a 2-foot deep hole.

You have to set it properly. Then you have to fill the hole with either concrete or dirt.

Ensure that it fits tightly into the hole and doesn’t wobble. In this case, it can cause a problem in the future.

Installing Metal Fence Posts as a Repair

When there is an existing wood fence with rotted posts, it can be repaired just by replacing the existing post with a new galvanized metal post.

Steps to install a new metal post in place of the ruined post:-

• The first step is to dismantle the rotted post from the wood fence. You have to be extra careful during the dismantling process. As the wood fence will be used.
• To remove the rotted fence, you have to remove the concrete in-ground surrounding it. If there is no concrete then you have one less work to do.
• If there is concrete surrounding the metal post, you have to dig on either side of the concrete. Then you have to push the post back and forth so it can be easily removed.
• Then you have to remove the post from the concrete. It is best to take others’ help while removing the post as it is heavy and may cause you injury. The best thing is to use professional help. Skilled workers can do the work easily in less time.
• To remove the post from concrete you can use a lever, jack, or fulcrum.
• When you successfully take the rotted post out of the ground, then you have to set the new post in its place.
• Use a tube to hold the concrete hole in its place, then you can set the metal post into the hole easily.
• Ensure that the new Metal post is truly aligned with the post. Otherwise, it will not be set in a straight line with the existing wood fence. And that will not give an aesthetic look.
• When the new post is placed properly in place of the rotted post. Then to have to pour concrete on it very carefully.
• After the concrete is set, you have to secure the wood fence panel to the new metal post.

Also Read: All About Modern Front Door Ideas | What Should We Utilize for | Modern Front Door Color Ideas

Conclusion

Wood fence panels attached to a metal post are one of the popular fencing methods.

It is preferred by many people as it gives the benefit of two materials which are wood and metal.

Wood fences provide privacy and are also aesthetically pleasing to the eyes. And the metal post is used for its strength and sturdiness.

Above in the article, everything is mentioned regarding the attachment of the wood fence panel to the metal post. Ways to attach wood to metal, securing Techniques, how to install metal posts as repair, etc.

Hope you get all the information you were looking for.

And you can start attaching wood fence panels to the metal fence in front of your house.

You can also share this article with your friends, family, and colleagues who can get benefit from this. If you have any query to can ask.

---

Frequently Asked Questions (FAQs): 

Do Metal Fence Posts Need Concrete?

“But don’t you have to concrete the post?” This is one of the most common questions we get asked. The answer is “NO” a driven post is as strong or stronger than a concreted post in almost all soil types except rolling sand.

Are Steel Fence Posts Better Than Wood?

Steel posts won’t be affected by natural elements or termites, so they’re widely considered more durable than wood fence posts. Although steel is prone to rust, galvanized steel is not, and since fence posts are made with galvanized steel, rust is not a worry.

Can You Put a Wood Fence Up on Chain Link Posts?

As long as your steel posts are solidly in the ground, you should be able to convert your chainlink fence to a wood fence pretty easily.

Do Self Tapping Screws Go Through Metal?

As the name suggests, self-tapping screws are screws that have the ability to tap threads into the material. Self-tapping screws are used for all sorts of material including wood, metal, and brick. These screws cannot drill through metal and require a pilot hole to be pre-drilled before installation.

Should I Leave a Gap Between Fence Boards?

For solid privacy fences, the fence boards can be butted tightly together or spaced 3/8 to 1/4 inch apart to allow for wood expansion and contraction during varying weather conditions.

Do You Need to Leave a Gap Between Fence Boards?

Installing wooden fence boards too tight together: this will cause the boards to warp because when the wood becomes moist it will expand. Make sure to leave a half inch or more in between the boards.

How Deep Should a 6-Foot Fence Post Be in the Ground?

The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole.

How Deep Should a 8 Foot Fence Post Be?

How Deep Should a Fence Post Be? For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone. For gateposts, you’ll need concrete too.

Should Pressure Treated Fence Posts Be Set in Concrete?

With pressure-treated posts, the rot will be slow. We have three ways to solve the rotten post problem. First, the posts should be set on top of a bed of coarse gravel 3 to 6 inches deep, so the base of the post is in contact with the gravel. Concrete should be poured around the post – no concrete under the post.

How Deep Should a 10 Foot Fence Post Be?

The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post.

Is It Better to Nail or Screw Fence Boards?

Nails are faster than screws to install, meaning less labor for you or your builder (which may translate into lower installation cost). However, nails are more likely than screws to grow loose over time. Screws, on the other hand, secure the fence better than nails.

How Far Off the Ground Should a Vinyl Fence Be?

Most fencing experts recommend setting fence posts in concrete at least two feet into the ground. Our vinyl fence installation experts at Future Outdoors always set vinyl and wood fence posts 3 feet into the ground for our 6-foot and taller fences for extra stability and strength.

How Far Off the Ground Should a Privacy Fence Be?

Wooden privacy fences shouldn’t touch the ground. They must be 2in (5.08cm) or higher off the ground so water can drain from the property. If the fence is too low or touching the ground, moisture can collect and cause wood to rot, and it makes regular yard maintenance difficult.

How Far Off the Ground Should a Fence Be?

When building a wood fence, be sure to plan for a space between the pickets and the ground. In most applications, a wood fence should be installed at least two inches off the ground.

Should Fence Posts Be Inside or Outside?

Fence posts that have been placed outside of the fence material will take nearly all of the animal’s force. That’s because they are better suited to withstand the weight of an animal than the staples used to hold the fencing in place.

Do Fence Posts Go on the Inside or Outside?

The ‘quick’ answer is that the finished, or good side of the fence faces the outside of your property, visible to neighbors and the outside world. That being said, the fence posts (or poles), rails, and other hardware are installed on the inside of the fence line and face you.

What Is the Maximum Distance Between Fence Posts?

For most residential fences 8′ between posts is the maximum. Commercial fences (industrial chain link, for example) typically can handle up to 10′ spacing because of their stronger frames.

How Far Apart Are Metal Fence Posts?

Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.

How Far Apart Should Metal Fence Posts Be Set?

The typical spacing of posts is between 8′ and 12′. The distance should be determined by the type of fence and the amount of support that the fence needs in order to stay taught.

Wood Fence Vs Metal Fence Cost

On average, a wooden fence can cost between $1600 and $4000 depending on the type. On the other hand, an aluminum fence can range between $2000 and $5000. So, if you’re looking for a lower upfront cost, then a wood fence is what you need.

Cost of Metal Fence Vs Wood

A wooden fence is an excellent option if you don’t have a lot to spend right away. The up-front cost is lower than that of an aluminum or steel fencing. On average, a wooden fence can cost between $1600 and $4000 depending on the type. On the other hand, an aluminum fence can range between $2000 and $5000.

Cost of Iron Fence Vs Wood

Therefore to compare accurately, both bids must be the same brand of vinyl fence or two different brands of equal quality to assess the best price.

Is Metal or Wood Fence Cheaper?

Wood is a less expensive material than metal, so if you’re trying to save money upfront, it’s a good material for fencing. However, it will not last as long as metal, even if you maintain it regularly.

How to Create Secure Attachment in Adults?

1. Actively working on your relationship with yourself.
2. Purging toxic or counterproductive relationships.
3. Building your self-esteem.
4. Healthily expressing your emotions.
5. Lean on the support of friends and family.
6. Work on healing from past negative experiences in therapy.

How to Move from Anxious Attachment to Secure?

To change your style to be more secure, seek therapy as well as relationships with others who are capable of a secure attachment. If you have an anxious attachment style, you will feel more stable in a committed relationship with someone who has a secure attachment style. This helps you become more secure.

Anxious Attachment Style

Someone with an anxious attachment style may worry that their partner is pulling away from them and will often take small things personally. They may also seek constant reassurance to ease their sense of uncertainty about their bond. They can also become overly attentive to their partner.

How Can Educators Establish a Secure Attachment?

• Be sensitive and empathic: Children need your consistent responsiveness and warmth, especially during the early years.
• Respond calmly: Model good behavior and control your own emotions and behaviors.
• Be involved: It is important to interact, be present and positively engaged with your child.

What Does a Secure Attachment Style Look Like?

Empathetic and able to set appropriate boundaries, people with secure attachment tend to feel safe, stable, and more satisfied in their close relationships. While they don’t fear being on their own, they usually thrive in close, meaningful relationships.

How Long Will a Steel Post Last in the Ground?

As long as they are made from pre-galvanized steel and tightly fastened, steel fencing posts are a maintenance-free option. Once coated with a protective layer of zinc, it’s not uncommon for steel posts to last up to 70 years under certain conditions.

How Deep Should a Metal Fence Post Be?

The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

---

Like this post? Share it with your friends!

• All About Regrout Tile Without Removing Old Grout | Can You Regrout Over Existing Grout | How to Regrout Tile Without Removing Grout
• All About Bathroom Wall Paneling Ideas | Bathroom Wall Panel Ideas | Top Bathroom Wall Paneling Ideas
• All About Front Door Colors For Brick Houses | Benjamin Moore Paint Color Chart | Color Theory
• All About Gray House Color Schemes | Gray House Color Ideas | A Bit About Gray House Front Door Colors
• All About Green House Color Schemes | Things to Know When Choosing Green Siding Colors | What Are the Different Siding Parts Called